Working principle:

When the tilt switch of the vertical suspension deviates from the vertical direction by more than 15 ° after being subjected to the force of the material, the high-temperature resistant tilt switch inside the tilt switch acts. Regardless of the tilt direction, the normally closed contact will open. When the tilt switch disengages from the material and returns to the vertical position, the high-temperature resistant tilt switch is turned on. The unique high-temperature resistant inclination sensor can be applied to materials up to 240 ℃ to measure the level of high-temperature materials.

Technical parameters:

1) Rated voltage of 30-62 high-temperature tilt switch probe: 24VDC/1A

2) Probe operating temperature: -30~+240 ℃

3) Voltage of 30-78 controller: 220VAC

4) Controller operating temperature: -40~+70 ℃

5) Alarm time delay: 0-10 seconds adjustable

Features:

1) The high-temperature heavy-duty probe is made of cast iron with chrome plated surface (stronger than steel pipe);

2) Proprietary high-temperature sensor;

3) Alarm contacts can be set to either normally open or normally closed;

4) It can be equipped with a casing protection probe to reduce the oscillation amplitude of the probe;

5) The high-temperature heavy-duty probe is equipped with internal threads at the bottom for connecting accessories.

6) The tilt switch can be used alone with the probe or in conjunction with the control device

7) Durable and corrosion-resistant

8) Easy to install, all probes come with installation accessories

Application scope:

Detection of blockage in high-temperature material conveying chutes or transfer points, material flow detection

Steel slag detection

High temperature lime and cement detection

Boiler residue detection

Controller:

Power supply: 220VAC ± 10% 47-62HZ

Consumption power: 10W

Output: One double pole double throw non inductive contact, rated at 220VAC 10A

Delay output: 0-10 seconds, adjustable

Shell rating:

30-78 models: NEMA4X (imported)

Environmental temperature: -40 ℃~+70 ℃

Normal/Alarm Position: There is a jumper in the control device that can set the vertical or tilt state of the switch to normal.

Installation diagram

Model30-62- High Temperature (+240 ℃)